煤矸石的改性及其对稀土生产废水中氨氮的吸附

采用热改性、盐酸改性、硫酸改性、碱改性的方法分别制备了4种改性煤矸石吸附剂,研究了吸附工艺条件对4种改性煤矸石吸附剂对稀土生产废水中氨氮去除效果的影响以及吸附机理.实验结果表明:4种改性煤矸石吸附剂吸附氨氮的最佳工艺条件为:吸附剂加入量0.02 g/mL,振荡时间2.5 h,废水pH 7～8;4种吸附剂氨氮去除率大小顺序为:碱改性煤矸石＞硫酸改性煤矸石＞盐酸改性煤矸石＞热改性煤矸石;碱改性煤矸石的氨氮去除率最高,为59.19％;碱改性煤矸石吸附剂对含氨废水中氨氮的吸附较好地符合Langmuir方程和Freundlich方程,在一定程度上符合Temkin方程.     

垂直流人工湿地MgFe-LDHs覆膜改性基质净化效果研究

选取生物陶粒、无烟煤、沸石3种垂直流人工湿地常用基质,采用金属摩尔比(M2+ : M3+)为2:1的MgCl2溶液和FeCl3溶液在碱性条件下共沉淀即时生成MgFe-LDHs,并将其覆膜于所选3种垂直流人工湿地基质表面;构建模拟基质试验柱,对改性前后的6种基质进行垂直流人工湿地模拟柱净化受污染湖水的小试试验,并进行对比分析.结果表明:该种针对垂直流人工湿地典型基质的MgFe-LDHs覆膜改性方式可行;改性后的3种基质对CODCr、氨氮、总磷的净化效果均有不同程度的提高;其中,无烟煤基质的覆膜改性性能最优,改性后的无烟煤基质对CODCr、氨氮、总磷的平均去除率分别超过了80%、60%和90%.     

硅烷偶联剂对石英砂滤料的表面改性

采用硅烷偶联剂KH-550对石英砂滤料进行表面改性,以提高滤料表面的亲油疏水性.通过正交―单因素实验,考察KH-550浓度、改性温度以及搅拌时间对石英砂滤料表面改性效果的影响.结果表明,KH-550浓度为15%、改性温度为110℃、搅拌时间为15min时改性效果最好,水的润湿重量由改性前的1.5589g减小到0.0607g,而油的润湿重量改性前后基本不变.改性后石英砂对油的吸附容量增大到0.1843,与未改性石英砂相比提高了27.72%.扫描电镜与电子能谱研究表明,KH-550以化学键的方式结合在石英砂滤料表面,形成了牢固的有机包覆层,使得石英砂滤料的亲油疏水性大大提高.     

半焦脱硫剂的制备及其H2S脱除性能

利用废弃褐煤半焦原料作为炭基材料前驱体,经表面改性处理后制备高效脱硫剂,用于脱除原料气中的少量H2S杂质.经改性处理后,改性半焦的比表面积显著提高,形成丰富的织网结构,灰分和挥发分减少,固定碳含量增加,表面酸/碱性官能团含量也随着改性处理过程发生明显变化.采用固定床反应器和模拟气体考察脱硫剂的脱硫性能,结果表明,原料褐煤半焦基本没有脱除H2S的能力.改性处理后,随着改性半焦物化性质的改善,脱硫能力迅速提高穿透时间达95 min.负载铁氧化物有利于进一步增强其脱硫性能,穿透时间提高到1095 min;温度、氧含量和水含量等因素对脱硫性能的影响也非常显著.     

钒-氮共掺杂TiO2的合成、表征及光催化性能

以偏钒酸铵作为钒源、二乙醇胺作为氮源,采用溶胶-凝胶法合成了钒-氮共掺杂TiO2.通过XRD、UV-Vis、TEM、XPS、BET等表征手段,对光催化剂的晶体结构及形貌、紫外可见光响应特性、比表面积、表面元素及存在形式进行分析,探讨钒氮共掺杂TiO2的影响机制.以苯酚为污染物,评价其在紫外光及可见光下的光催化活性.结果显示,所合成的光催化剂均为锐钛矿,钒氮共掺杂能够增大其比表面积,并使光吸收范围拓展至可见光区,N以O—Ti—N、Ti—O—N结构存在于钒氮共掺杂TiO2中,V以V5+的形式存在,钒-氮共掺杂TiO2在紫外光下对苯酚降解速率是TiO2的3.18倍,在可见光下对苯酚的降解速率为TiO2的2.56倍,重复使用7次后,钒-氮共掺杂TiO2对苯酚的降解率仍可以达到99%以上.     

生物炭改良盐碱地研究与应用进展

盐碱地作为21世纪严重威胁粮食产量的农田问题土壤之一,分布广泛,具有极大的开发潜力.生物炭作为高效的新型土壤改良剂,在缓解土壤酸碱障碍、土壤污染治理、碳封存和肥料缓释等方面发挥了重要作用,有力地推动了盐碱地农业的可持续发展.近年来,关于生物炭改良盐碱地的研究和应用备受关注.但由于生物炭来源、结构和组分的复杂性和非均质性,其对盐碱地的改良效果存在极大的不确定,也缺乏关键机制的系统总结和深度探讨,这限制了生物炭技术在盐碱地改良中的进一步推广和应用.通过综合分析生物炭对盐碱地土壤理化性质、养分有效性和生物特征的影响,归纳总结生物炭和改性生物炭对盐碱地的改良效果及其提质增效作用,阐明生物炭在盐碱地改良中存在的可能机制,并对未来研究方向进行了展望,可为进一步研发绿色高效精准的盐碱地生物炭改良技术及其推广应用提供参考.     

新型胺化介孔炭的制备及其对Pb(II)的吸附

采用微波辅助磷酸活化制备了高中孔率蔗渣基介孔炭,并通过硝酸氧化和乙二胺聚合在其孔道内修饰了含氮多胺基团,探索了溶液浓度、温度、吸附剂剂量等对改性介孔炭的Pb(II)吸附性能、行为和热力学特性的影响.结果表明,蔗渣基介孔炭较宽的孔道结构可通过乙二胺缩水聚合反应在其表面接枝酰胺、仲胺等含氮基团;胺化改性增强化了介孔炭对水溶液中Pb(II)的固定作用,改性后介孔炭对Pb(II)的吸附量高达180mg/g,是改性前介孔炭的1.5倍;改性介孔炭对Pb(II)的去除率显著增加,对溶液浓度<60mg/L的Pb(II)去除率接近100%.等温吸附与热力学数据表明,胺化改性介孔炭对Pb(II)的吸附位能量存在差异化,吸附是自发的吸热反应过程,温度对铅(II)离子吸附有促进作用,化学作用在吸附过程中发挥了重要作用.     

城市地区空气污染的数值模拟

本文运用电像法,把一个求解输送扩散方程的二维伪请模式发展成三维模式,尝试把高斯模式和数值计算模式结合起来运用于数值模拟。本文对水平风场内插方法进行了发展。摸拟结果表明:本文建立的一套模式是有效的,能够成功地摸拟污染物在城市地区的输送扩散行为。      

Tailoring the simultaneous abatement of methanol and NOx on Sb-Ce-Zr catalysts via copper modification

● Cu addition enhances CH₃OH oxidation and alleviates its inhibitory effect on SCR. ● Cu addition improves the activation of SCR reactants in the presence of methanol. ● Damaged structure by more Cu addition decreases specific surface area and acidity. ● Excessive Cu addition would lead to the narrowing of SCR temperature window. Simultaneously removal of NO_x and VOCs over NH₃-SCR catalysts have attracted lots of attention recently. However, the presence of VOCs would have negative effect on deNO_x efficiency especially at low temperature. In this study, copper modification onto Sb_0.5CeZr₂O_x (SCZ) catalyst were performed to enhance the catalytic performance for simultaneous control of NO_x and methanol. It was obtained that copper addition could improve the low-temperature activity of both NO_x conversion and methanol oxidation, where the optimal catalyst (Cu_0.05SCZ) exhibited a deNO_x activity of 96% and a mineralization rate of 97% at 250 °C, which are around 10% higher than that of Cu free sample. The characterization results showed that copper addition could obviously enhance the redox capacity of the catalysts. As such, the inhibition effect of methanol incomplete oxidation on NO adsorption and NH₃ activation were then lessened and the conversion of surface formamide species were also accelerated, resulting in the rising of NO_x conversion at low temperature. However, excessive copper addition would damage the Sb-Ce-Zr oxides solid solution structure owing to Cu-Ce strong interactions, decreasing the surface area and acidity. Meanwhile, due to easier over-oxidation of NH₃ with more Cu addition, the temperature window for NO_x conversion would become quite narrow. These findings could provide useful guidelines for the synergistic removal of VOCs over SCR catalyst in real application.     

Gas-initiation under UV and liquid-grafting polymerization on the surface of polysulfone hollow fiber ultrafiltration membrane by dynamic method

Using the inner-surface of polysulfone hollow fiber ultrafiltration membranes as grafted layer, the method of gas-initiation and liquid-polymerization has been studied, which aimed to adjust the diameter of the pores in the membranes. The degree of polymerization varied with the changes of the parameters, such as irradiation time, monomer concentration, temperature and time of polymerization and so on. The results indicated that using benzophenone(BP) which is in a gaseous condition as photo-initiator, acrylamide as graft monomer, the polyacrylamide chain was grafted on the surface of membranes. After the surface membrane being modified, the water flux and retention altered, and thus it can be seen that the diameter of the pores in the membrane was altered. These experiments contribute to finding a new way to produce the hollow fiber membrane with the small pore size and are extraordinarily worth developing and studying.